EVACT0=OFF, EVACT1=OFF, CNTSEL=START
Event Control
| EVACT0 | Timer/counter Input Event0 Action 0 (OFF): Event action disabled 1 (RETRIGGER): Start, restart or re-trigger counter on event 2 (COUNTEV): Count on event 3 (START): Start counter on event 4 (INC): Increment counter on event 5 (COUNT): Count on active state of asynchronous event 6 (STAMP): Stamp capture 7 (FAULT): Non-recoverable fault |
| EVACT1 | Timer/counter Input Event1 Action 0 (OFF): Event action disabled 1 (RETRIGGER): Re-trigger counter on event 2 (DIR): Direction control 3 (STOP): Stop counter on event 4 (DEC): Decrement counter on event 5 (PPW): Period capture value in CC0 register, pulse width capture value in CC1 register 6 (PWP): Period capture value in CC1 register, pulse width capture value in CC0 register 7 (FAULT): Non-recoverable fault |
| CNTSEL | Timer/counter Output Event Mode 0 (START): An interrupt/event is generated when a new counter cycle starts 1 (END): An interrupt/event is generated when a counter cycle ends 2 (BETWEEN): An interrupt/event is generated when a counter cycle ends, except for the first and last cycles 3 (BOUNDARY): An interrupt/event is generated when a new counter cycle starts or a counter cycle ends |
| OVFEO | Overflow/Underflow Output Event Enable |
| TRGEO | Retrigger Output Event Enable |
| CNTEO | Timer/counter Output Event Enable |
| TCINV0 | Inverted Event 0 Input Enable |
| TCINV1 | Inverted Event 1 Input Enable |
| TCEI0 | Timer/counter Event 0 Input Enable |
| TCEI1 | Timer/counter Event 1 Input Enable |
| MCEI0 | Match or Capture Channel 0 Event Input Enable |
| MCEI1 | Match or Capture Channel 1 Event Input Enable |
| MCEI2 | Match or Capture Channel 2 Event Input Enable |
| MCEI3 | Match or Capture Channel 3 Event Input Enable |
| MCEI4 | Match or Capture Channel 4 Event Input Enable |
| MCEI5 | Match or Capture Channel 5 Event Input Enable |
| MCEO0 | Match or Capture Channel 0 Event Output Enable |
| MCEO1 | Match or Capture Channel 1 Event Output Enable |
| MCEO2 | Match or Capture Channel 2 Event Output Enable |
| MCEO3 | Match or Capture Channel 3 Event Output Enable |
| MCEO4 | Match or Capture Channel 4 Event Output Enable |
| MCEO5 | Match or Capture Channel 5 Event Output Enable |